Syringe Injector

11,450.00

Product description:
A syringe is a simple pump consisting of a plunger that fits tightly in a tube. The plunger can be pulled and pushed along inside a cylindrical tube (called a barrel), allowing the syringe to take in and expel a liquid or gas through an orifice at the open end of the tube. The open end of the syringe may be fitted with a hypodermic needle, a nozzle, or tubing to help direct the flow into and out of the barrel. Syringes are often used to administer injections, insert intravenous drugs into the bloodstream, apply compounds such as glue or lubricant , and measure liquids.
product mix:
Handle material:The material is ABS plastic,High strength, good toughness.
Needle interface:The interface of the needle is precisely designed so that the needle will not fall off during injection.
Piston:Dose fixed continuous syringe,special circular needle.
Product Features:

  1. Syringe tube – accurate scale, anti-corrosion, long service time;
  2. Handle shank – apply to human engineering design, high polymer material for easy and comfortable holding, and labor saving;
  3. Accurate dosage adjusting make sure safe injection;
  4. Special design for vaccine bottle.
  5. Continuous injection saves time and effort
  6. Different capacity are available

Use and Dosage Regulation Method
1.Get the round needle ready
2.Grasp the sleeve with your fingers and rotate to open it
3.Press the piston, push it to the top, and insert the round needle into the hole
4.After grasping and unscrewing the piston, replace the piston with the required dose
5.Tighten the new piston gently with a circular needle
6.Remove the circular needle from the piston
7.Put a drop of castor oil on the piston ring
8.Tighten the sleeve
Attention:
1.Need disinfection thoroughly after using and keep it dry.
2.Warm water cleaning,High pressure steam disinfection is not allowed.
3.Avoid losing small accessories such as springs and plastic gaskets.
Installation of accessories
1 Inserting bottle needle ,1 Air relief needle ,2 Steering valve ,2 Small spring ,2 Sealing ring ,1 O-style ring, 1 plastic pipe

Category:
Call Now
0